| 1.
Locate flush line at rear of stool. |
A. Cut line just below vacuum
breaker.
B. Insert T-valve with arrow pointing towards vacuum
breaker.
C. Secure in place with two clamps provided with kit.
[Photo A]
|
| 2.
Mounting the dispenser reservoir to the wall |
A. Locate reservoir to the back
or side of the wall providing easy access for filling.
B. Keep level or lower than back of stool.
C. Screw reservoir into place with the three screws
provided with kit. [Photo B]
|
| 3.
FINAL CHECK LIST |
A. Check the stool by flushing.
B. Check the water line for leaks.
C. Add a few ounces of Blue
Streak Chemical®
to reservoir.
D. Flush stool. Finish filling reservoir.
|
|
4. Q: How Do
I Winterize the Blue Streak Dispenser?
|
A: Run
the chemical level low [1to 2 inches] in the reservoir and
winterize your unit as you would normally. To remove chemical from
the reservoir; unscrew the tank from the wall leaving tubing
attached to tank and pour chemical into another container.
|
|
Photo A
|
Photo B
|
|
