| |
|
INSTALLATION
INSTRUCTIONS
Thetford Aqua-Magic® STYLE PLUS &
STYLE LITE |
| |
| 1.
Remove the stool to access the back. |
A. Remove plastic shroud around base.
B. Remove two bolts (one on each side).
C. Remove water line located at rear of stool. (MAKE SURE
WATER IS OFF).
|
|
|
2. Locate flush line between vacuum breaker and bowl.
A. You will need a piece of ½" ID clear vinyl tubing about
1 ¼" long. (Not provided)
B. Remove vacuum breaker from back of stool. [Photo View 1]
C. Install t-valve inline with arrow pointing towards the bowl. [Photo
View 2]
(T-valve will not work if installed
backwards)
D. Reinstall vacuum breaker.
3. Reinstall stool making sure all gaskets, bolts and water
connections are secure.
|
[View 1]
[View 2]
|
| 4. Mounting the dispenser reservoir to the wall. |
A. Locate reservoir to the back or side of the wall providing
easy access for filling.
B. Keep level or lower than back of stool.
[Photo View 3]
C. Screw reservoir into place with the three screws provided.
|
[View 3]
|
| |
| 5. FINAL CHECK LIST |
A. Check water line for leaks.
B. Check stool by flushing.
C. Add a few ounces of Blue Streak Chemical to reservoir.
D. Flush stool. Finish filling reservoir.
|
| |
