|
INSTALLATION
INSTRUCTIONS
THETFORD
AQUA-MAGIC® GALAXY / STARLITE
|
| 1.
Remove the stool to access the back. |
A. Remove two bolts, one
in the front by the pedal and one in the rear ( or the plug
located at the top of the stool ).
B. Remove the water line located at the rear of the stool.
( MAKE SURE WATER IS OFF )
|
| |
| 2.
Locate flush line between vacuum breaker and bowl. |
A. Cut line half way
between the two.
B. Insert T-valve with small arrow pointing towards bowl.
( THIS IS VERY IMPORTANT )
C. With the two hose clamps enclosed in kit, secure T- valve
in place.
(Photo View 1)
Click
here for full diagram of assembly & Parts
|
View 1
|
3.
Reinstall stool making sure all gaskets,
bolts and water connections
are secure. |
| |
| 4.
Mounting the dispenser reservoir to the wall. |
A. Locate reservoir to the
back or side of the wall providing easy access for filling.
B. Keep level or lower than back of stool.
C. Screw reservoir into place with the three screws provided
with kit.
|
| |
| 5.
FINAL CHECK LIST |
A. Check water
line for leaks.
B. Check stool by flushing.
C. Add a few ounces of Blue
Streak Chemical® to
reservoir.
D. Flush stool. Finish filling reservoir.
|
|
|
|
6. Q: How Do
I Winterize the Blue Streak Dispenser?
|
A: Run
the chemical level low [1to 2 inches] in the reservoir and
winterize your unit as you would normally. To remove chemical from
the reservoir; unscrew the tank from the wall leaving tubing
attached to tank and pour chemical into another container.
|
